CBIES AUTOMOTIVE|Treatment Method For Damage Of Cold Drawn Welded Pipe Parts

Mar 21, 2023

The treatment method for the damage of cold-drawn welded pipe parts is as follows: firstly, regular maintenance should be carried out according to the corresponding maintenance standards; secondly, parts with severe wear should be replaced as soon as possible, and professional maintenance personnel should carry out regular maintenance and maintenance, and lubricate the machine Oil, etc., and then apply high-quality anti-rust oil on the sliding surface to prevent the equipment from oxidizing and rusting, especially when it is idle for a long time.

Regularly check the wear of the parts, especially when the workload is heavy, and pay more attention to these parts, in case the wear seriously affects the production process.

In addition, during the heat treatment process, due to the inconsistent cooling speed and time of the surface layer and the core layer, a temperature difference will be formed, resulting in uneven volume expansion and contraction, resulting in stress, that is, thermal stress and corresponding measures should be taken to ensure the quality of the welded pipe.

 

A. In terms of economic benefits, the cold-drawn welded pipe has low noise; the circulating water cooling system is adopted, which is environmentally friendly and energy-saving.

B. In terms of usage, welded pipes are more and more widely used, suitable for agricultural and industrial production.

C. In terms of quality, the welded pipe products of cold-drawn welded pipes are good, the welds are intact, there are not many burrs, the speed is fast, and energy saving and money are saved.

D. High-frequency welded pipe has been widely used and popularized due to its advantages of good weld quality, small internal and external burrs, fast welding speed, and low power consumption.

E.On the welded pipe unit, it is generally possible to produce heterosexual pipes, and more square pipes and rectangular pipes are produced. Due to the large section modulus of square rectangular tubes, cold-drawn welded tubes can withstand large bending forces, which can save a lot of metal, save processing time and reduce component weight, etc., so they are increasingly popular and used in various aspects of industry and agriculture.

There are many processes in welded pipe processing, and every detail needs our attention. Welded pipes need to go through various processes before use. The heat treatment of welded steel pipe is an essential link in the process of welded steel pipe. Thermal processing is a metal thermal processing process in which metal materials are heated, heated, and cooled in a certain medium. The metallographic properties of the metal are controlled by changing the surface or internal metallographic structure of the material.

During the heating and cooling process of the structural welded pipe workpiece, due to the inconsistent cooling speed and time of the surface layer and the core layer, a temperature difference will be formed, resulting in uneven volume expansion and contraction, resulting in stress, that is, thermal stress. Under the action of thermal stress, the initial temperature of the surface layer is lower than that of the core layer, and the shrinkage rate is greater than that of the core layer, so the core layer is stretched. After cooling is complete, the skin is compressed and the core is stretched because the cooling volume reduction of the core cannot proceed freely.

 

Cold-drawn welded pipe is a kind of precision welded pipe. Welded pipes are more common in CBIES's main export products, including but not limited to seats, instrument beams, crash bars, chassis, exhaust tubes, shock absorbers, torsion bars, and other automotive pipe fittings and parts. part. The main export markets include North America, Central and South America, Southeast Asia, the European Union, Central Asia, and other regions

CBIES-AUTOMOTIVE-Demand-for-steel